Turbocharging/Supercharging; Turbocharger; Exploded View - Turbocharger - Seat Ateca 2017 Workshop Manual

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
21 –

Turbocharging/supercharging

1

Turbocharger

⇒ "1.1 Exploded view - turbocharger", page 307
⇒ "1.2 Turbo compressor: removing and fitting", page 309
⇒ "1.3 Adjusting charge pressure positioner V465 ", page 316
1.1

Exploded view - turbocharger

Part I
Part II ⇒ page 308
1 - O-ring
❑ Renew after removing
❑ Lubricate lightly with en‐
gine oil
2 - Bolt
❑ 9 Nm
3 - Coolant supply line
4 - O-ring
❑ Renew after removing
❑ Lubricate with coolant
5 - Gasket
❑ Renew after removing
6 - Nut
❑ Renew after removing
❑ 25 Nm
7 - Turbocharger
❑ Removing and fitting
⇒ page 309
8 - Oil supply line
9 - Heat shield
10 - Bolt
❑ 9 Nm
11 - Nut
❑ 9 Nm
12 - Bolt
❑ 9 Nm
13 - O-ring
❑ Renew after removal
❑ Lubricate lightly with engine oil
14 - Bolt
❑ 9 Nm
15 - Bolt
❑ 9 Nm
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
EA 888 III. Gen) - Edition 10.2018
1. Turbocharger
307