Seat Ateca 2017 Workshop Manual page 330

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
♦ Wedge - 3409-
Removing
– Drain coolant ⇒ page 239
– Remove radiator cowl
Vehicles with radiator, variant 1
– Use the removal wedge to press both sides of locking tab -1-
away from the engine compartment - 3409- and push the
radiator -in the direction of the arrow-.
– Pull radiator out of mountings at bottom.
– Remove radiator from water radiator for charge air cooling cir‐
cuit.
– Remove coolant radiator upwards.
Continued for all vehicles
– Remove front bumper cover ⇒ General body repairs, exterior;
Rep. gr. 63 ; Front bumper; Removing and installing bumper
cover .
– Remove right and left headlights ⇒ Electrical system; Rep. gr.
94 ; Headlights; Removing and installing headlights
– Loosen hose clips -arrows-, and remove charge air hose -A-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
322
Rep. gr.21 - Turbocharging/supercharging
.
⇒ page 300 .