Cylinder Head, Valve Gear; Cylinder Head; Exploded View - Cylinder Head - Seat Ateca 2017 Workshop Manual

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
15 –

Cylinder head, valve gear

1

Cylinder head

⇒ "1.1 Exploded view - cylinder head", page 105
⇒ "1.2 Removing and installing cylinder head", page 108
⇒ "1.3 Removing and installing vacuum pump", page 115
⇒ "1.4 Check compression pressure", page 116
1.1

Exploded view - cylinder head

Note
Renew cylinder head bolts.
♦
Always renew self-locking nuts, bolts which have been tight‐
♦
ened with turning further angle, as well as oil seals and gas‐
kets.
The plastic protectors fitted to protect the open valves must be
♦
removed only immediately before the cylinder head is fitted.
After fitting a new cylinder head or cylinder head gasket, the
♦
engine oil and coolant must be changed.
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
EA 888 III. Gen) - Edition 10.2018
1. Cylinder head
105