Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
4.2
Exploded view - oil pressure switches/oil pressure control
1 - Bolt
❑ Renew
❑ 4 Nm +90°
2 - Valve for oil pressure con‐
trol - N428-
❑ Removing and fitting
⇒ page 231
3 - O-ring
❑ Renew
❑ Lubricate lightly with en‐
gine oil
4 - O-rings
❑ Renew
❑ Lubricate lightly with en‐
gine oil
5 - Bolt
❑ Renew
❑ 4 Nm +45°
6 - Piston cooling jet control
valve - N522-
❑ Removing and fitting
⇒ page 223
7 - Seal
❑ Renew
8 - Oil pressure switch - F1-
❑ Blue or grey insulation
❑ Checking ⇒ Vehicle di‐
agnostic tester
❑ Removing and fitting
⇒ page 224
❑ 20 Nm
9 - Oil pressure switch for reduced oil pressure - F378-
❑ Brown insulation
❑ Checking ⇒ Vehicle diagnostic tester
❑ Removing and fitting
❑ 20 Nm
10 - Seal
❑ Renew
11 - Seal
❑ Renew
12 - Stage 3 oil pressure switch - F447-
❑ Checking ⇒ Vehicle diagnostic tester
❑ Removing and fitting
❑ Installation position
❑ 20 Nm
222
Rep. gr.17 - Lubrication
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
⇒ page 225
⇒ page 226
⇒ page 223
.