Seat Ateca 2017 Workshop Manual page 282

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
– Release hose clip -1- and detach air hose from charge air
cooler.
Note
Item -2- can be disregarded.
– Remove air filter housing
– Vehicles with auxiliary radiator (left-side): Move coolant hose
-3- clear.
– Move electrical wiring harnesses -1, 2- clear at air pipe.
– Unfasten screw-type clip -4-.
– Unscrew bolts -arrows- and detach air pipe.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Free coolant hose -2-.
– Remove bolts -arrows-.
– Release the air deflector -1- in the lock carrier and pull it out
in the -direction of the arrow-.
– Lift retaining clip -1-, detach upper coolant connection and
press to side.
274
Rep. gr.19 - Cooling
⇒ page 356 .