Seat Ateca 2017 Workshop Manual page 394

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
– Tighten union nut on fuel rail -arrow- using socket AF 17 mm
- T10456- .
– Counterhold on hexagon -A-, and tighten union nut -arrow-
using open end spanner insert, AF 17 mm - V.A.G 1331/6- .
– Wait at least 1 minute and check tightening torque of union
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
nuts.
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Further assembly is basically the reverse of the removal proce‐
dure.
Note
Upon completion of any repair work, start the engine and check
the fuel system for leaks.
Specified torques
♦ ⇒ "7.1 Exploded view - high-pressure pump", page 380
386
Rep. gr.24 - Mixture preparation - injection