Seat Ateca 2017 Workshop Manual page 390

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
– For reasons of space, remove the air filter housing together
with the intake hose
– Release fastener -arrow- and detach wiring duct -4- from cool‐
ant pipe.
– Unscrew bolt -1- for air pipe.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Push air pipe aside slightly and unscrew pipe clamp -arrow-.
CAUTION
The fuel system is pressurised.
Risk of injury due to fuel which may spurt out.
– Wear safety goggles.
– Wear protection gloves.
– Release pressure: place clean cloth around connection and
carefully open connection.
– Counterhold on hexagon -A-, and loosen union nut -arrow-.
Remove high-pressure line.
382
Rep. gr.24 - Mixture preparation - injection
⇒ page 356 .