Seat Ateca 2017 Workshop Manual page 184

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
– Unplug electrical connector -1- at activated charcoal filter sys‐
tem solenoid valve 1 - N80- .
– Press release tabs on crankcase breather hose -2- and detach
hose.
– Remove bolts -arrows- and remove the crankcase breather
system.
– Remove actuators for camshaft adjustment -arrows-.
Note
The timing valves have a left-hand thread.
– Turn assembly tool -T10352/2- in direction of -arrow- to re‐
move timing valves (left and right).
Depending on the current model version of the timing valve, one
of the tools shown must be used:
♦ Installation tool - T10352-
♦ Installation tool - T10352/1-
♦ Installation tool - T10352/2-
♦ Installation tool - T10352/3-
♦ Installation tool - T10352/4-
– Remove bolts -arrows- and detach bearing saddle.
176
Rep. gr.15 - Cylinder head, valve gear
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.