Seat Ateca 2017 Workshop Manual page 202

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
♦ Mounting and dismounting element for valve cotters - VAS
5161 A-
♦ Guide plate for 2.0 ltr. and 3.0 ltr. FSI engine - VAS 5161/19C-
♦ Engine and gearbox support - VAS 6095A-
♦ Cylinder head tensioning device - VAS 6419-
♦ Assembly sleeve ⇒ Electronic parts catalogue
Removing valve stem oil seals
– Remove camshafts
– Mark original positions of roller rocker fingers and hydraulic
compensation elements for re-installation.
– Remove roller rocker fingers together with hydraulic compen‐
sation elements and place down on a clean surface.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
194
Rep. gr.15 - Cylinder head, valve gear
⇒ page 158 .