Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
– Counterhold union -A- and unscrew union nut -arrow-.
– Unscrew union nut -arrow- on fuel rail using socket AF 17 mm
- T10456- , and remove high-pressure line.
Note
Collect escaping fuel with a clean cloth.
♦
♦
Seal off open connections with clean caps. Make sure no dirt
gets into the fuel system.
– Unscrew nuts -A- from intake manifold, and unscrew bolts
-arrows- using socket Torx - T10347- .
– Slightly pull off intake manifold from cylinder head and un‐
screw bolts -arrows-for bracket -A-.
– Take intake manifold off cylinder head.
Note
Block off the intake ports with a clean cloth.
364
Rep. gr.24 - Mixture preparation - injection
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.