Seat Ateca 2017 Workshop Manual page 346

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
Fuel pressure sender in high-pressure system
1 - Fuel pressure sensor - G247-
Intake manifold change-over
1 - Vacuum unit for intake manifold flaps
2 - Intake manifold flap valve - N316-
Intake manifold flap potentiometer - G336- -1-
Bend aside retaining tabs to allow for pulling potentiometer out of
intake manifold
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Electrical connectors
1 - for combustion chamber injectors, FSI
2 - For knock sensor 1 - G61-
3 - Stage 3 oil pressure switch - F447-
4 - For intake manifold flap valve - N316- , fuel pressure sender -
G247- , intake manifold flap potentiometer - G336- , coolant
temperature sender - G62- and Hall sender - G40-
338
Rep. gr.24 - Mixture preparation - injection