Seat Ateca 2017 Workshop Manual page 33

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
– Open spring-type clip -2- and remove the hose from pressure
differential sender for particulate filter 1 - G1037- .
Note
Disregard -item 1-.
Vehicles with particulate filter, front
– Open spring-type clips and detach the hoses -2- and -3- from
pressure differential sender for particulate filter - G1037-
Note
Disregard -item 1-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Vehicles with particulate filter, all-wheel drive and front-wheel
drive
– Loosen clamp -arrow-, and push it to rear.
– Remove the particulate filter together with the sensors.
– Move bracket for pressure differential sender for particulate
filter - G1037- -1- to the rear and tie it up.
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
1. Removing and installing the engine
25