Securing Engine To Engine And Gearbox Support - Seat Ateca 2017 Workshop Manual

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
– To do this, turn engine with counterhold - T10172A- 60° for
each nut in engine direction of rotation.
Note
If all 6 nuts are not removed from the torque converter, the torque
converter will be pulled out when the gearbox is removed from
the engine!
– Unscrew bolts securing sump to gearbox -arrows-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Unscrew upper connecting bolts -arrows- securing gearbox to
engine using e.g. double hexagon flex head socket.
– Separate gearbox -3- from engine. At the same time, press
torque converter -1- using, e.g., a screwdriver -2- against
gearbox -direction of arrow-.
– After gearbox has been removed, secure torque converter to
prevent it from falling out.
1.4 Securing engine to engine and gearbox
support
Special tools and workshop equipment required
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
1. Removing and installing the engine
37