Seat Ateca 2017 Workshop Manual page 192

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
– Move guide rail -2- upwards and screw in bolt -1-.
– Turn inlet camshaft in direction of -arrow 1- using adapter -
T40266- , remove camshaft clamp - T40271/2- from between
splines of chain sprocket in direction of -arrow 2- and bring
camshaft into rest position.
Checking valve timing - with markings on cylinder head
– Turn vibration damper to TDC position using counter-hold tool
- T10355- .
• Notch on vibration damper must align with arrow marking on
timing chain cover (bottom) -arrow-.
• Markings -1- on camshaft chain sprockets must be aligned
with markings -2 and 3- on cylinder head.
184
Rep. gr.15 - Cylinder head, valve gear
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.