Seat Ateca 2017 Workshop Manual page 157

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
♦ Dial gauge set, 4-part - VAS 6341-
♦ Dial gauge adapter - T10170 A-
– Remove the upper cover of the distribution chain
⇒ page 121 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
– Remove noise insulation ⇒ General body repairs, exterior;
respect to the correctness of information in this document. Copyright by SEAT S.A.
Rep. gr. 66 ; Noise insulation; Assembly overview - noise in‐
sulation .
– Removing and installing right front wheel and front element of
the right wheel housing liner ⇒ General body repairs, exterior;
Rep. gr. 66 ; Wheel housing liners; wheel housing liner on the
front side .
– Using 24 mm socket, turn crankshaft via vibration damper in
direction of engine rotation until markings -1- and -2- are al‐
most at top.
– Remove ignition coil with output stage for cylinder 1
⇒ page 452 .
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
149
3. Chain drive