Seat Ateca 2017 Workshop Manual page 336

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
Operation process
– Release hose clips -1 and 2-, and remove air pipe.
– Pull off breather pipe for crankcase breather -arrow-.
– Seal connection using a sealing plug -1- from the engine bung
set and secure it using a hose clip -2-.
– Connect the adapter - V.A.G 1687/10- with -V.A.G 1687/14-
to the exhaust gas turbocharger.
– Connect charge air system tester - V.A.G 1687- to adapter.
328
Rep. gr.21 - Turbocharging/supercharging
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.