Seat Ateca 2017 Workshop Manual page 323

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
– Unscrew screw -1- and remove coolant supply line -2- of the
exhaust gas turbocharger, carefully pivot hose and coolant
supply line and place backwards.
– Unscrew bolts -arrows-, and pull oil supply pipe -4- off turbo‐
charger -3-.
– Seal lines with suitable plugs from the engine bung set - VAS
6122- .
– Remove nuts -arrows-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
315
1. Turbocharger