Seat Ateca 2017 Workshop Manual page 267

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
Flushing cooling system with coolant
– Connect suction hose -A- to container -2- for coolant.
1 - Flushing cylinder block with coolant:
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Clamp off breather hoses for heat exchanger and cylinder
head with hose clamps.
– Open shut-off tap -A- on valve block.
• Pump approx. 5 litres of coolant through engine.
– Close shut-off tap -A-.
2 - Flushing cylinder head with coolant:
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
259
1. Cooling system/coolant