Seat Ateca 2017 Workshop Manual page 316

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
16 - Sleeve
17 - O-ring
❑ Renew after removing
18 - Bolt
❑ 9 Nm
Part II
Part I ⇒ page 307
1 - Bolt
❑ 9 Nm
2 - Oil return line
3 - O-ring
❑ Renew after removing
❑ Lubricate lightly with en‐
gine oil
4 - Bolt
❑ 10 Nm
5 - Charge pressure positioner
- V465-
❑ Not available as re‐
placement part, sup‐
plied together with tur‐
bocharger
❑ Adjusting ⇒ page 316
6 - Nut
❑ 10 Nm
7 - Bolt
❑ 9 Nm
8 - Sleeve
9 - O-ring
❑ Renew after removing
10 - Bolt
❑ 9 Nm
11 - Turbocharger air recircu‐
lation valve - N249-
❑ Note installation posi‐
tion ⇒ page 309
12 - O-ring
❑ Renew after removal
13 - Turbocharger
❑ Removing and fitting
14 - O-ring
❑ Renew after removing
❑ Lubricate with coolant
15 - Bolt
❑ 9 Nm
308
Rep. gr.21 - Turbocharging/supercharging
.
⇒ page 309
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.