Seat Ateca 2017 Workshop Manual page 369

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
– Free coolant hose -3-.
– Unplug electrical connector -1- at charge pressure sender -
G31- .
– Remove bolts -arrows-.
– Loosen hose clip -2- on air hose and pull air hose downwards
off throttle valve module - GX3- .
– Free coolant hose -3-.
– Free electrical wiring harnesses -1- and -2- from fittings and
lay them to one side.
– Unfasten screw-type clip -4-.
– Remove bolts -arrows-.
– Loosen hose clip -arrow-, and remove left charge air hose
-1- downwards, together with air pipe.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
361
4. Suction hose