Timing Chain Cover; Assembly Overview - Timing Chain Cover - Seat Ateca 2017 Workshop Manual

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
2

Timing chain cover

⇒ "2.1 Assembly overview - timing chain cover", page 119
⇒ "2.2 Removing and installing timing chain cover", page 121
2.1

Assembly overview - timing chain cover

1 - O-ring
❑ Must be renewed if re‐
moved
❑ Lubricate before fitting
2 - Guide tube for oil dipstick
❑ Engages in the lower
cover of the chain cover
3 - Bolt
❑ 9 Nm
4 - Front coolant pipe
5 - Bolt
❑ Tightening sequence
⇒ page 120
6 - Bolt
❑ 9 Nm
7 - Valve 1 for variable distri‐ Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
bution - N205-
respect to the correctness of information in this document. Copyright by SEAT S.A.
❑ Removing and fitting
⇒ page 186
❑ Renew O-ring
⇒ Item 15 (page 120)
8 - Bolt
❑ 9 Nm
9 - Exhaust camshaft control
valve 1 - N318-
❑ Removing and installing
⇒ page 186
❑ Renew O-ring
⇒ Item 15 (page 120)
10 - Seals
❑ Must be renewed if removed
❑ Installation position: small inner diameter outwards
❑ For replacing the upper cover of the distribution chain
❑ Lubricate before fitting
11 - Gasket
❑ Renew if damaged.
12 - Sealing cap
13 - Timing chain cover (top)
❑ Tightening sequence
❑ Removing and installing
14 - Gasket
❑ Renew if damaged.
⇒ page 120
⇒ page 121
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
⇒ Item 13 (page 119)
119
2. Timing chain cover