Separating Engine And Gearbox - Seat Ateca 2017 Workshop Manual

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
– Carefully lower engine/gearbox assembly. Check that all vac‐
uum lines and electrical wiring between engine, gearbox and
body have been detached while doing so.
1.2

Separating engine and gearbox

⇒ "1.2.1 Separating engine and gearbox - vehicles with manual
gearbox", page 29
⇒ "1.2.2 Separating engine and gearbox, vehicles with 7-speed
dual clutch gearbox", page 31
⇒ "1.2.3 Separating engine and gearbox, vehicles with 6-speed
dual clutch gearbox", page 33
1.2.1 Separating engine and gearbox - vehi‐
cles with manual gearbox
Special tools and workshop equipment required
♦ Hooks - 10 - 222 A /2-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
♦ Workshop hoist - VAS 6100-
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
1. Removing and installing the engine
29