Seat Ateca 2017 Workshop Manual page 287

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
♦ Hose clamps, up to Ø 25 mm - 3094-
♦ Hose clip pliers - VAS 6362-
Removing
– Remove air filter housing ⇒ page 356 .
– Release the hose clamp -2-.
– Remove bolt -1- and press air pipe (left-side) towards left
slightly.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
279
2. Coolant pump/thermostat assembly