León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
3
Crankcase breather system
⇒ "3.1 Exploded view - crankcase breather system", page 140
⇒ "3.2 Removing and installing the oil separator", page 141
3.1
Exploded view - crankcase breather system
1 - Flexible pipe
❑ For crankcase breather
2 - Cover
❑ For oil separator
3 - Oil separator
❑ Removing and installing
⇒ page 141
❑ Replace if damaged
4 - O-ring
❑ renew
❑ Moisten with oil before
installing.
5 - Connection
❑ Check for correct posi‐
tioning.
6 - Flexible pipe
❑ For crankcase breather
7 - Bolt
❑ Self-locking
❑ renew
❑ 9 Nm
Oil separator - tightening torque and sequence
– Tighten bolts to 9 Nm in sequence -1 ... 9-.
140
Rep. gr.17 - Lubrication
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.