4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
3
Coolant pipes
⇒ "3.1 Exploded view - coolant pipes", page 287
⇒ "3.2 Removing and installing coolant pipe at front of engine",
page 287
⇒ "3.3 Removing and installing coolant pipes (top)", page 289
3.1
Exploded view - coolant pipes
1 - Front coolant pipe
❑ Removing and fitting
⇒ page 287
2 - Bolts
❑ 6 Nm
3 - Upper coolant pipe
❑ Removing and fitting
⇒ page 289
4 - Bolts
❑ 9 Nm
5 - Bolt
❑ 9 Nm
6 - Coolant line
7 - Bolts
❑ 9 Nm
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
3.2
Removing and installing coolant pipe at
front of engine
Special tools and workshop equipment required
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
287
3. Coolant pipes