Seat Ateca 2017 Workshop Manual page 418

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
1.5.2 Disconnect exhaust gas pipe/silencer,
Cupra ST Carbon Fiber Kit
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
♦ The connecting pipe -1- can be cut through at the separating
points in order to renew the rear silencers separately.
♦ For individual renewal of the centre silencer, a cutting point is
provided in the connecting pipe.
♦ The separating point -arrow- is marked with indentations on
the outside of the exhaust pipe.
♦ A second mechanic is required for the procedure.
Separating right rear silencer
– Unscrew bolt -2- for rear right silencer -1-.
410
Rep. gr.26 - Exhaust system