Seat Ateca 2017 Workshop Manual page 289

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
♦ Hose clip pliers - VAS 6362-
Removing
– Remove noise insulation ⇒ General body repairs, exterior;
Rep. gr. 66 ; Noise insulation; Assembly overview - noise in‐
sulation .
– Release hose clip -1- and detach air hose from charge air
cooler.
Note
Item -2- can be disregarded.
– Remove air filter housing
– Vehicles with auxiliary radiator (left-side): Move coolant hose
-3- clear.
– Move electrical wiring harnesses -1, 2- clear at air pipe.
– Unfasten screw-type clip -4-.
– Unscrew bolts -arrows- and detach air pipe.
⇒ page 356 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
2. Coolant pump/thermostat assembly
281