Exploded View - Auxiliary Radiator - Seat Ateca 2017 Workshop Manual

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
12 - Bonded rubber bush
❑ For charge air cooler
13 - O-ring
❑ Renew
❑ Lubricate with coolant
14 - Retaining clip
❑ For radiator outlet coolant temperature sender - G83-
Connecting coolant hose with plug-in connector to radiator
– Remove old O-ring -2- in coolant hose -3-.
– Moisten new O-ring with coolant and insert into coolant hose.
– Press coolant hose onto coolant pipe -1- until it engages with
a click.
– Press coolant hose in again and then pull to check that plug-
in connector is correctly engaged.
4.2

Exploded view - auxiliary radiator

⇒ "4.2.1 Assembly overview - right auxiliary radiator", page 292
⇒ "4.2.2 Assembly overview - auxiliary radiator", page 293
4.2.1 Assembly overview - right auxiliary radi‐
ator
Note
On vehicles with dual clutch gearbox, an auxiliary radiator may
be installed at front right (depending on version).
292
Rep. gr.19 - Cooling
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.