Seat Ateca 2017 Workshop Manual page 320

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
– Unscrew the bolt -1-, turn the rubber sleeve in the
-direction of the arrow-, remove and place to one side.
– Release fastener -arrow- and remove wiring duct -4- upwards
from bracket.
– Unscrew bolts -1, 2 and 3-. Swivel coolant pipe to the side.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Remove actuators for camshaft adjustment -1-.
– Remove ignition coils with output stages -arrows-
⇒ page 452 .
– Unscrew bolts -arrows- and nut -1-.
– Detach heat shield -2-.
312
Rep. gr.21 - Turbocharging/supercharging