Seat Ateca 2017 Workshop Manual page 447

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
– Unscrew bolt -1- and remove wiring of pressure differential
sender for particulate filter - G1037- -2- in
-direction of arrow-.
Note
Disregard -item 3-.
– Open spring-type clip -1- and remove the hose from pressure
differential sender for particulate filter - G1037- .
– Unscrew temperature sender in front of particulate filter -
G506- -2-.
– Open spring-type clip -2- and remove the hose from pressure
differential sender for particulate filter 1 - G1037- .
– Unscrew temperature sender behind particulate filter - G527-
-1-.
RHD vehicles
– Unscrew bolts and remove steering rack heat shield ⇒ running
gear, axles, steering; Rep. gr. 48 ; steering rack, assembly
overview - steering rack .
Continued for all vehicles
– Unscrew bolts -arrows-, and remove heat shield -1- from steer‐
ing rack.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
439
2. Emission control