Renewing Needle Bearing In Crankshaft - Seat Ateca 2017 Workshop Manual

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
Marking of bearing shell for bearing cap:
Marking on crankshaft refers to bottom bearing shell (bearing
shell for bearing cap).
– Note down letters and refer to table for colour code to be fitted.
S =
R =
G =
B =
W. =
3.4

Renewing needle bearing in crankshaft

Only vehicles with a dual clutch gearbox
Special tools and workshop equipment required
♦ Counter support e.g. KUKKO 22-1 - VAS 251 621-
♦ Internal puller - VAS 251 635-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
82
Rep. gr.13 - Crankshaft group
Black
red
Yellow
blue
White