Removing And Installing Radiator Fans - Seat Ateca 2017 Workshop Manual

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
4.6

Removing and installing radiator fans

⇒ "4.6.1 Removing and installing radiator fan V7 ", page 302
⇒ "4.6.2 Removing and installing radiator fan V177 ", page 302
4.6.1 Removing and installing radiator fan -
V7-
Removing
Note
All cable ties must be installed in their same place again.
– Remove radiator cowl
– Disconnect electrical connector -arrow-.
– Unscrew bolts -1- and remove radiator fan - V7- .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
Fitting
respect to the correctness of information in this document. Copyright by SEAT S.A.
Install in the reverse order of removal, observing the following:
– Install radiator cowl
Specified torques
♦ ⇒ "4.3 Exploded view - radiator cowl and radiator fans",
page 295
4.6.2 Removing and installing radiator fan -
V177-
Removing
Note
All cable ties must be installed in their same place again.
– Remove radiator cowl
– Disconnect electrical connector -arrow-.
– Unscrew bolts -2- and remove radiator fan - V177- .
Fitting
Install in the reverse order of removal, observing the following:
– Install radiator cowl
Specified torques
♦ ⇒ "4.3 Exploded view - radiator cowl and radiator fans",
page 295
302
Rep. gr.19 - Cooling
⇒ page 300 .
⇒ page 300 .
⇒ page 300 .
⇒ page 300 .