Supercharger Air System; Assembly Overview - Charge Air System - Seat Ateca 2017 Workshop Manual

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
2

Supercharger air system:

⇒ "2.1 Assembly overview - charge air system", page 319
⇒ "2.2 Exploded view - hose connections for charge air system",
page 321
⇒ "2.3 Charged air cooler: removing and fitting", page 321
⇒ "2.4 Removing and installing charge pressure sender G31 ",
page 326
⇒ "2.5 Checking charge air system for leaks", page 327
⇒ "2.6 Removing and installing air intake pipe between turbo‐
charger and charge air cooler", page 329
2.1

Assembly overview - charge air system

Note
Installing screw-type clips for charge air hose connections
♦
Before carrying out tests or repairs, check all air pipes and air hoses to make sure they are firmly seated
♦
and not leaking.
Observe rules for cleanliness
♦
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
⇒ page 9 .
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
EA 888 III. Gen) - Edition 10.2018
⇒ page 321 .
2. Supercharger air system:
319