Seat Ateca 2017 Workshop Manual page 432

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
Vehicles with four-wheel drive
– Remove right-hand wheel.
– Unscrew screws -arrows- with the bit - 3247- and remove heat
shield -1-.
– Unscrew the bolts -arrows- and remove the heat protection
plate -1-.
– Mark the position of the propshaft to the flange of the bevel
box.
– To loosen and tighten propshaft, counterhold on rear final
drive.
424
Rep. gr.26 - Exhaust system
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.