Seat Ateca 2017 Workshop Manual page 457

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
♦ Torque wrench - V.A.G 1331-
♦ Tool set - T10395 A-
Removing
• Observe safety precautions when working on the exhaust sys‐
tem ⇒ page 3 .
– Unscrew the four plastic nuts -arrows- on the left underbody
trim -1- and move the trim slightly downward.
– Release from bracket and disconnect electrical connector -1-
from temperature sender behind particulate filter - G527- .
– Unclip wires of temperature sender behind particulate filter -
G527- from fasteners.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
3. Exhaust gas temperature regulation
449