Supporting Engine In Installation Position - Seat Ateca 2017 Workshop Manual

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
Removing
– Remove noise insulation ⇒ General body repairs, exterior;
Rep. gr. 66 ; Noise insulation; Assembly overview - noise in‐
sulation .
– Remove bolts -1, 2, 3- and detach pendulum support.
Fitting
Install in the reverse order of removal, observing the following:
Specified torques
Stage Bolts
1. -2 and 3-
2. -1-
3. -1 - 3-
♦ ⇒ General body repairs, exterior; Rep. gr. 66 ; Noise insula‐
tion; Assembly overview - noise insulation
2.5 Supporting engine in installation posi‐
tion
Special tools and workshop equipment required
♦ Support tool - 10 - 222 A-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
♦ Adapter - 10 222A/29-
Specified torque/turning further angle
50 Nm
130 Nm
Turn 90° further
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
51
2. Assembly bracket