Seat Ateca 2017 Workshop Manual page 25

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
Vehicles with windscreen washer tank, right side
– Remove windscreen washer tank filler -2- ⇒ Electrical system;
Rep. gr. 92 ; Windscreen washer system; Removing and in‐
stalling tank for windscreen washer system .
Continued for all vehicles
– Lift the retaining clip -arrow-, remove the coolant hose at the
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
top left from the radiator.
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Remove radiator cowl
– Release the hose clamp -2-.
Note
Use removal lever - 80 - 200- to lever out the wiring clips when
performing the next work steps.
⇒ page 300 .
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
1. Removing and installing the engine
17