Removing And Installing Camshaft - Seat Ateca 2017 Workshop Manual

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
4.2

Removing and installing camshaft

⇒ "4.2.1 Distinguishing features of guide rail for camshaft timing
chain", page 158
⇒ "4.2.2 Removing and installing camshaft, version A",
page 158
⇒ "4.2.3 Removing and installing camshaft, version B",
page 172
4.2.1 Distinguishing features of guide rail for
camshaft timing chain
Depending on the model, different guide rails may be installed.
– Remove timing chain cover (top)
– Check -arrow- which version of the guide rail -1- is installed.
– Removing and installing camshaft with guide rail of version A
⇒ page 158 .
– Removing and installing camshaft with guide rail of version B
⇒ page 172 .
4.2.2 Removing and installing camshaft, ver‐
sion A
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Special tools and workshop equipment required
♦ Assembly tool - T10352A-
♦ Assembly tool - T10352/1-
♦ Assembly tool - T10352/2-
♦ Assembly tool - T10352/3-
♦ Assembly tool - T10352/4-
158
Rep. gr.15 - Cylinder head, valve gear
⇒ page 121 .