Table of Contents
Advertisement
●
Raise the carpet at the recess (arrow)
›››
Fig.
122.
Note
After use, return the jack to its initial position
using the handle in order to securely store it
in the vehicle.
Accessing the vehicle tool kit and tyre
mobility system in vehicles fitted with
the SEAT SOUND 7 speaker system
(with subwoofer)*
●
Open the boot hatch and lift the shelf.
If necessary, remove the boot variable floor
●
›››
page
76.
Lift up the carpet from the recess and re-
●
move it from the luggage compartment.
Disconnect the subwoofer's speaker cable.
●
●
Completely remove the hand-controlled
wheel from the centre of the subwoofer
speaker by turning it anti-clockwise.
Take out the subwoofer, which is on top of
●
the tools and tyre mobility system.
When finished, place the tools and system
●
back in the same way and place as before to
ensure the speaker sits properly in its hous-
ing.
Emergencies
●
Place the subwoofer in the direction of the
arrow and with the word "FRONT" facing for-
ward.
●
Reconnect the speaker cable and firmly ro-
tate the securing wheel clockwise so that the
subwoofer is firmly in place.
Components
Components of the vehicle tool kit
Fig. 123
The vehicle tool kit depends on the vehicle
equipment. The following is a description for
a vehicle with all options.
The individual elements of the vehicle tool
›››
kit
Fig. 123
Screwdriver with hexagon socket in the
1
handle for screwing and unscrewing the
wheel bolts. The screwdriver bit is inter-
changeable. The screwdriver may be
found underneath the wheel spanner.
Adapter for anti-theft bolt. SEAT recom-
2
mend you carry the wheel bolt adapter in
the vehicle tool kit at all times. The code
number of the anti-theft wheel bolt is
stamped on the front of the adapter. In
case it is lost, another adapter can be or-
dered using this number. Note the anti-
theft bolt code for the wheels and keep it
in a place other than the vehicle.
Towline anchorage, removable.
3
Wire hook for pulling off the wheel cover,
4
integral hubcaps and the wheel bolt
caps.
Jack. Before storing the jack in the tool
5
kit, fold its hook. The crank must then be
folded tight against the side of the jack in
order for it to be safely stored.
Wheel spanner.
6
Wheel bolt cap clips.
7
Note
The jack does not generally require any main-
tenance. If required, it should be greased us-
ing universal type grease.
173
Advertisement
Table of Contents
