Seat Ateca 2017 Workshop Manual page 243

4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
1 - Radiator
2 - Coolant temperature send‐
er at the radiator outlet - G83-
3 - Actuator for engine temper‐
ature regulation - N493-
4 - Cylinder head/cylinder
block
5 - Throttle
6 - Auxiliary Heater
❑ Not installed
7 - Coolant expansion tank
8 - Filler cap for expansion tank
❑ Checking pressure re‐
lief valve ⇒ page 247
9 - Non-return valve
10 - Exhaust manifold
❑ Integrated in cylinder
head
11 - Turbocharger
12 - Heat exchanger for heater
13 - Throttle
14 - Non-return valve
15 - Auxiliary pump for heating
- V488-
16 - Coolant temperature sen‐
sor - G62-
17 - Coolant shut-off valve -
N82-
18 - Throttle
19 - Coolant pump
20 - Gearbox oil cooler
21 - Coolant shut-off valve - N82-
22 - Non-return valve
23 - Auxiliary radiator
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
EA 888 III. Gen) - Edition 10.2018
235
1. Cooling system/coolant