Seat Ateca 2017 Workshop Manual page 236

Hide thumbs Also See for Ateca 2017:
Table of Contents

Advertisement

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
♦ Oil pressure tester - V.A.G 1342-
♦ 24 mm jointed spanner - T40175-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
Test requirements
Oil level OK
Minimum temperature of engine oil 80 °C (the radiator fan
must have started once).
Note
The oil pump is regulated and has 2 pressure levels. The
pressure levels are checked subsequently.
During the run-in period or emergency running mode of the
engine the oil pump operates only at high pressure level.
The oil pressure depends on the engine oil temperature. At an
engine oil temperature of 80°C, the approximate middle value
must be reached.
Development
Vehicles with windscreen washer tank, right side:
– Remove windscreen washer tank filler -2- ⇒ Electrical system;
Rep. gr. 92 ; Windscreen washer system; Removing and in‐
stalling tank for windscreen washer system .
228
Rep. gr.17 - Lubrication
respect to the correctness of information in this document. Copyright by SEAT S.A.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Leon 2013Leon st 2013

Table of Contents