Seat Ateca 2017 Workshop Manual page 259

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
– Close shut-off taps -A- and -B-.
Note
Do not fit the valve block onto the test adapter - VAS 691 005/5-
yet. The filler hose must be bled first.
– Switch on pump for -VAS 531 007- .
– Open cut-off tap -A-.
– Open shut-off tap -B- briefly to bleed filler hose.
– Close shut-off taps -A- and -B-.
Connecting coolant flushing and filling device - VAS 531 007- :
– Open filler cap -arrow- of coolant expansion tank.
– Screw test adapter -2- ( -VAS 691 005/5- ) onto coolant ex‐
pansion tank -1-.
– Pull drain hose -arrow- off plug-in connector -B- on valve block.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
251
1. Cooling system/coolant