Seat Ateca 2017 Workshop Manual page 70

Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
♦ Counterhold - T10355-
♦ Assembly tool - T10531-
Components of assembly tool - T10531- :
♦ Retainer - T10531/1-
♦ Cotter pin - T10531/2-
♦ Turning over tool - T10531/3-
♦ Flange nut - T10531/4-
Note
The vibration damper securing bolt -A- is used to secure the vi‐
bration damper -1- and the timing chain sprocket -2- on crankshaft
-3-. Before unscrewing the securing bolt, lock the timing chain
sprocket in position relative to crankshaft as described below:
62
Rep. gr.13 - Crankshaft group
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.