Control Subsystem Peripheral Configuration 4 (Ccnf4) Register; Master Subsystem Memory Configuration (Memcnf) Register; Control Subsystem Peripheral Configuration 4 (Ccnf4) Register Field Descriptions; Master Subsystem Memory Configuration (Memcnf) Register Field Descriptions - Texas Instruments Concerto F28M35 Series Technical Reference Manual

www.ti.com

1.13.2.19 Control Subsystem Peripheral Configuration 4 (CCNF4) Register

Figure 1-46. Control Subsystem Peripheral Configuration 4 (CCNF4) Register
31
15
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 1-57. Control Subsystem Peripheral Configuration 4 (CCNF4) Register Field Descriptions
Bit Field
31-3 Reserved
2-0 FLASH

1.13.2.20 Master Subsystem Memory Configuration (MEMCNF) Register

NOTE: This register is read only from the control subsystem.
Figure 1-47. Master Subsystem Memory Configuration (MEMCNF) Register
31
15
Reserved
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 1-58. Master Subsystem Memory Configuration (MEMCNF) Register Field Descriptions
Bit Field
31-8 Reserved
7-0 S7-0
SPRUH22I – April 2012 – Revised November 2019
Submit Documentation Feedback
Reserved
R-x
Value Description
Reserved
C28 Flash Size Configuration
111 512KB
110 256KB
R-0
Value Description
Reserved
S7-0 Shared Memory Configuration
S7-0 Shared RAM configuration.
0 S7-0 RAM is disabled
1 S7-0 RAM is enabled
Copyright © 2012–2019, Texas Instruments Incorporated
Reserved
R-x
Reserved
R-0
8 7 6 5
S7 S6 S5
R-0 R-0 R-0
System Control Registers
3 2
FLASH
4 3 2 1
S4 S3 S2 S1
R-0 R-0 R-0 R-0
System Control and Interrupts
16
0
16
0
S0
R-0
187