Control Subsystem Peripheral Configuration 2 (Ccnf2) Register; Control Subsystem Peripheral Configuration 2 (Ccnf2) Register Field Descriptions - Texas Instruments Concerto F28M35 Series Technical Reference Manual

www.ti.com
Table 1-54. Control Subsystem Peripheral Configuration 1 (CCNF1) Register Field
Bit Field
7-0 EPWM8-1

1.13.2.17 Control Subsystem Peripheral Configuration 2 (CCNF2) Register

Figure 1-44. Control Subsystem Peripheral Configuration 2 (CCNF2) Register
31
15
Reserved
R-0:0
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 1-55. Control Subsystem Peripheral Configuration 2 (CCNF2) Register Field Descriptions
Bit Field
31-9 Reserved
8 EQEP3
7-1 Reserved
0 EPWM9
SPRUH22I – April 2012 – Revised November 2019
Submit Documentation Feedback
Descriptions (continued)
Value Description
ePWM8-1 Configuration
When set, this enables the respective ePWM module.
0 Respective ePWM module is disabled
1 Respective ePWM module is enabled
9 8
EQEP3
R-x
Value Description
Reserved
eQEP3 Configuration. When set, this enables the eQEP3 module.
0 eQEP3 module is disabled
1 eQEP3 module is enabled
Reserved
ePWM9 Configuration. When set, this enables the ePWM9 module.
0 ePWM9 module is disabled
1 ePWM9 module is enabled
Copyright © 2012–2019, Texas Instruments Incorporated
Reserved
R-0:0
7
Reserved
R-0
System Control Registers
1 0
EPWM9
R-x
System Control and Interrupts
16
185