Abs Warning Light Check; Ebd Warning Light (Brake Warning Light) Check; Dtc Check - Suzuki Grand Vitara 2011 Manual

Hide thumbs Also See for Grand Vitara 2011:

Manual (35 pages)

Table of Contents

Step 2: Driving Test

Test drive the vehicle at 40 km/h for more than a minute and check if any trouble symptom (such as abnormal lighting

of ABS warning light) exists.

If the malfunction DTC is confirmed again at ignition switch ON, driving test as described is not necessary. Proceed to

Step 3: DTC Check

Recheck DTC referring to "DTC Check".

Step 4: ABS Check

According to ABS Check for the DTC confirmation in Step 3, locate the cause of the trouble, namely in a sensor,

switch, wire harness, connector, actuator assembly or other part and repair or replace faulty parts.

Step 5: Brakes Diagnosis

Check the parts or system suspected as a possible cause referring to "Brakes Symptom Diagnosis in Section 4A" and

based on symptoms appearing on the vehicle (symptom obtained through Steps 1 and 2 and repair or replace faulty

parts, if any).

Step 6: Intermittent Problem Check

Check parts where an intermittent trouble is easy to occur (e.g., wire harness, connector, etc.), referring to

"Intermittent and Poor Connection Inspection in Section 00" and related circuit of trouble code recorded in Step 1 to 3.

Step 7: Final Confirmation Test

Confirm that the problem symptom has gone and the ABS is free from any abnormal conditions. If what has been

repaired is related to the malfunction DTC, clear the DTC once referring to "DTC Clearance" and perform test driving

and confirm that no DTC is indicated.