Suzuki Baleno Manual page 5

0A-2 GENGERAL INFORMATION
1. Flywheel bolts or drive plate bolts for A/T vehicle
HOW TO USE THIS MANUAL
1) There is a TABLE OF CONTENTS FOR THE WHOLE MANUAL
on the first page of this manual, whereby you can easily find the
section that offers the information you need. Also, there is a
TABLE OF CONTENTS on the first page of EACH SECTION,
where the main items in that section are listed.
2) Each section of this manual has its own pagination. It is indi-
cated at the top of each page along with the Section name.
3) The SPECIAL TOOL usage and TIGHTENING TORQUE
SPECIFICATION are given as shown in figure below.
6) Install oil pump. Refer to Item "Oil pump" for installation of
oil pump.
7) Install flywheel (M/T vehicle) or drive plate (A/T vehicle).
Using special tool, lock flywheel or drive plate, and tighten
flywheel or drive plate bolts to specification.
Special Tool
(A): 09924-17810
Tightening Torque
(c): 78 N·m (7.8 kg-m, 56.5 lb-ft)
4) A number of abbreviations and symbols are used in the text.
For their full explanations, refer to "ABBREVIATIONS AND
SYMBOLS MAY BE USED IN THIS MANUAL" of this section.
5) The SI, metric and foot-pound systems are used as units in this
manual.
6) DIAGNOSIS and CORRECTION are included in each section
as necessary.
7) At the end of each section, there are descriptions of SPECIAL
TOOLS, REQUIRED SERVICE MATERIALS and TIGHT-
ENING TORQUE SPECIFICATIONS that should be used for
the servicing work described in that section.