Rear Planetary Ring Gear Assembly - Suzuki Liana RH418 Supplementary Service Manual

10) Install one-way clutch No.1 (1) with snap ring (2).
11) Install carrier front thrust roller bearing (1).
12) Coat two thrust bearing races (4) with A/T fluid.
13) Install planetary pinion gear assembly (3) and
overdrive clutch hub (2) with snap ring (1).
14) Install two thrust bearing races (4).
15) Check operation of one-way clutch No.1.
Automatic Transmission/Transaxle:

Rear planetary ring gear assembly

1) Set one-way clutch No.0 to one-way clutch No.0
outer race and rear planetary ring gear.
NOTE
Make sure that thinner section "A" of one-
way clutch faces toward front side.
I2RH01510169-01
2) Install one-way clutch No.0 retainer (1) and rear ring
gear thrust roller bearing (2).
3) Install snap ring (3).
I2RH01510168-01
4) Install rear ring gear flange (3) with snap ring (4).
5) Coat sun gear thrust roller bearing race (1) and
carrier rear thrust roller bearing (2) with A/T fluid.
6) Install them.
I2RH01510167-01
5A-105
I2RH01510178-01
I2RH01510179-01
I2RH01510180-01