REAR DOOR LOCK
REMOVAL
1) Remove window regulator handle (if equipped), inner garnish,
door trim, power window switch (if equipped) and door sealing
cover.
For details, refer to Steps 1) – 6) of "DOOR GLASS" in this sec-
tion.
2) Disconnect joint of door opening control rod.
3) Remove door latch assembly with door inside handle.
4) Remove door latch assembly.
INSTALLATION
Reverse removal procedure for installation.
REAR DOOR ASSEMBLY
REMOVAL/INSTALLATION
Follow procedures referring to "FRONT DOOR" in this section.
NOTE:
Refer to the figure for location of rear door harness coupler.
1. Corrugation tube
2. Coupler
BODY SERVICE 9-11
1. Outside handle
2. Inside handle
3. Latch assembly
4. Latch striker