Toyota Celica 2005 Repair Manual page 2491

Air Outlet Damper Control Cable
2005 CELICA (RM1131U)
AIR CONDITIONING − HEATER CONTROL ASSEMBLY
REMOVAL
1. REMOVE CENTER CLUSTER FINISH PANEL
(See page BO−79)
2. DISCONNECT HEATER CONTROL CABLES
NOTICE:
When the air mix damper control cables is disconnected,
should not bend the cable.
Air Mix Damper Control Cable
Air Inlet Damper Control Cable
3. REMOVE HEATER CONTROL ASSEMBLY
Release the 2 claws and pull out the A/C control assembly, then
disconnect the connector.
I13903
4. REMOVE HEATER CONTROL PANEL
(a) Remove the 2 screws.
(b) Slide and remove the A/C control assembly.
H12626
2490
AC−67
AC2HF−03
I13901